Automotive Technology (AUTO)

AUTO 010  Introduction to Automotive Technology   Units: 3

This course provides an overview of the major components and systems found on modern automobiles. The course includes an overview of the automotive industry, shop safety, hand tools usage, basic theory of major automobile systems and basic vehicle maintenance and service. C-ID: AUTO 110X
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 011B  Auto Electronics & Electrical Systems   Units: 4

This course provides theory and hands-on experience in the fundamentals of automotive electricity and electronics including basic electrical principles, circuit components, circuit types, electrical system service and maintenance, diagnosis and repair of common circuit malfunctions. The focus is then placed on foundational automotive electrical components and systems including: batteries, starting systems and charging systems with an emphasis on troubleshooting, diagnosis and repair of common electrical system malfunctions. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 010 or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 011C  Advanced Automotive Electrical Systems   Units: 4

This course provides theory and hands-on experience in intermediate to advanced automotive body electricity circuits and systems including body control computers, bus communication, multiplexing, instrument panel circuits, an introduction to advanced driver assist systems (ADAS) and an introduction to passive restraint systems. There is a hands-on emphasis focusing on diagnosing, trouble-shooting and repairing intermediate to advanced body electrical system malfunctions. A uniform is required for this course.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 011B
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 012A  Automotive Suspension & Steering Systems   Units: 4

This course provides theory and hands-on experience in automotive steering and suspension systems including: theory of operation, service, diagnosis and repair. The course includes the following topics: front and rear suspension types, steering systems, four-wheel alignment, shocks, struts, tires and wheels. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 010 or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 013A  Automotive Braking Systems   Units: 4

This course provides theory and hands-on experience in automotive braking systems including: theory of operation, service, diagnosis and repair including both base braking and anti-lock braking systems and components. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 014A  Automotive Engine Management   Units: 4

This course provides theory and hands-on experience in the fundamentals of automotive engine management including: basic fuel injection, ignition systems and emission systems. The focus is then placed on foundational engine management components and systems including fuel injection, electronic ignition and emission control systems with an emphasis on servicing, troubleshooting, diagnosis and repair of common engine management malfunctions. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 010 or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 014B  Advanced Engine Management   Units: 4

This course provides theory and hands-on experience in intermediate to advanced engine management systems including fuel injection, electronic ignition, emission controls, OBDII, as well as service and maintenance, diagnosis and repair of engine management malfunctions. The focus is then placed on advanced engine management components and systems including: computer inputs, outputs and control and OBDII logic with an emphasis on troubleshooting, diagnosis and repair of advanced engine management malfunctions. A uniform is required for this course.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 014A
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 015  Automotive Engine Diagnosis & Repair   Units: 4

This course provides theory and hands-on experience in automotive engine mechanical systems including: theory of operation, service, diagnosis and repair including the following topics: valve train components and procedures, engine block components and procedures, disassembly and reassembly skills and engine mechanical troubleshooting tests. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course.
Lecture Hours: 45         Lab Hours: 81          Repeatable: No
Grading: Letter
Prerequisite: AUTO 010 or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 016  Automotive Manual Transmissions & Drive Train Systems   Units: 3

This course provides theory and hands-on experience in manual transmissions/transaxles including: theory of operation, service, diagnosis and repair. The course includes the following topics: clutches, axles, driveshafts, transfer cases, differentials, electrical controls, diagnosis, troubleshooting and partial disassembly and reassembly. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 010 or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 017  Automatic Transmissions & Transaxles   Units: 3

This course provides theory and hands-on experience in automatic transmissions/transaxles including: theory of operation, service, diagnosis and repair. The course includes the following topics: torque converters, gear sets, hydraulic controls, electrical controls, diagnosis and troubleshooting and partial disassembly and reassembly. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course.
Lecture Hours: 27         Lab Hours: 81          Repeatable: No
Grading: Letter
Prerequisite: AUTO 010 or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 018  Automotive Heating, Ventilation & Air Conditioning   Units: 4

This course provides theory and hands-on experience in automotive heating and air conditioning including: theory of operation, service, diagnosis and repair. The course includes the following topics: heating ventilation and air conditioning (HVAC) theory of operation, HVAC housing and ducting, HVAC controls, compressor and clutch operation and servicing and testing HVAC systems. A $20.00 test fee for the appropriate Automotive Service Excellent (ASE) Student Exam is required. A uniform is required for this course. C-ID: AUTO 170X
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 020A  Automotive Quick Service   Units: 3

This course provides theory and hands-on experience in performing key automotive services required by entry-level technicians in an automotive repair facility atmosphere. It is geared for those students entering the workforce as an automotive technician. A uniform is required for this course.
Lecture Hours: 18         Lab Hours: 108          Repeatable: No
Grading: Letter
Prerequisite: AUTO 011B & AUTO 013A
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 021A  Automotive Diagnosis & Troubleshooting   Units: 2

This course provides an overview of Root Cause Analysis and its application as relevant to automotive diagnosis and troubleshooting. The focus is on electrical and drivability diagnosis, but includes guidelines for any vehicle system diagnosis and troubleshooting. The coursework will include scenario based diagnosis and cold circuit analysis. This course will help anyone interested in developing an effective, logical approach to automotive diagnosis and troubleshooting.
Lecture Hours: 36         Lab Hours: None          Repeatable: No
Grading: Letter
Prerequisite: AUTO 011B
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 040E  CNG Diagnosis & Repair   Units: 4

This course provides classroom lecture/discussion and hands-on training on CNG diagnosis and repair. The course is designed to introduce the service technician to safety, diagnostic and repair practices and procedures unique to gaseous fuel vehicles including: ignition, fuel delivery and emissions systems design, operation, diagnosis and service. A uniform is required for this course.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 041B  CNG Installation & Repair   Units: 3

This course is designed to introduce students to CNG installation and basic service and repair. The following topics are covered in this course: gaseous fuel safety, CNG conversion advantages and disadvantages, and service of CNG conversions.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 042B  Automotive Mechatronics   Units: 3

This course provides the learners with the proper mindset and skills to service today's vehicles. The internal combustion motor is no longer the heart of vehicles, it is the electrical system. Vehicles are moving from a mechanical focused to an electrical focus. Automotive mechatronics will focus on the synergy between the mechanical, computer, software, and electrical systems of today's vehicle.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 011B or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 043A  Intro to Hybrid, Electric & Fuel-Cell Vehicle Technology   Units: 3

This course explores the use of Hybrid and Electric battery power for vehicle transportation. Topics will include safety when using high voltage, maintenance, drivability, inverter, DC/DC power transfer, and battery technology. Physics of battery storage, Hybrid generation systems, Electric vehicle applications and their integrated systems from many manufacturers will be discussed. Hybrid and high voltage service and maintenance procedures. This course will help prepare the learner to successfully complete the L-3 ASE exam.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 010 or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 043B  Hybrid, Fuel-Cell & Electric Vehicle Diagnosis & Repair   Units: 3

This course provides the learners with the skills to diagnose and repair basic to intermediate-level malfunctions with hybrid, fuel-cell, and electric vehicles.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 043A and AUTO 011B or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 044B  Advanced Driver Assist Systems (ADAS) Level 1   Units: 3

This course offers knowledge and skills related to basic-level, advanced driver assist systems (ADAS). This will enhance the learner's knowledge and skills for employment and advancement within the automotive service industry.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 011B or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 044C  Advanced Driver Assist Systems (ADAS) Level 2   Units: 2

This course offers knowledge and skills related to intermediate-level, advanced driver assist systems (ADAS). This will enhance the learner's knowledge and skills for employment and advancement within the automotive service industry.
Lecture Hours: 18         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 011B or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 045A  Intro to Alternative Fuel Vehicles   Units: 2

This course provides an overview of the major alternative fuel vehicles available to the transportation industry. The course includes a brief history of alternative fuels, an overview of alternative fuels including an analysis of the pros and cons of each fuel and discussions on whether an alternative fuel vehicle is right for you. It is an essential course for those interested in an alternative fuel certificate or degree.
Lecture Hours: 36         Lab Hours: None          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 046B  Autonomous Vehicles   Units: 3

This course offers knowledge and skills related to autonomous vehicle operation and service. This will enhance the learner's knowledge and skills for employment and advancement within the automotive service industry.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 011B and AUTO 044B or concurrent enrollment
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 054D  Smog Check Inspector Training Level 1&2   Units: 4

This course is designed to provide students with fundamental knowledge of engine and emission control theory, design and operation. Students who successfully complete this training at a BAR-certified school will have met the BAR's training requirements to qualify to take the Smog Check Inspector state licensing examination.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: AUTO 014A
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 054E  Smog Check Diagnostic & Repair Technician   Units: 3

This course is designed to provide students with fundamental knowledge of engine and emission control theory, design and operation. Students who successfully complete this training at a BAR-certified school will have met the BAR's training requirements to qualify to take the Smog Check Inspector state licensing examination.
Lecture Hours: 36         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: AUTO 054D or concurrent enrollment
Advisory: AUTO 014A
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 093A  Intro to Light & Medium Duty Diesel Systems   Units: 2

This course is designed as an introduction to light duty diesel systems. Students will explore the operation and function of the key systems related to compression ignition engines. Students will learn safety of a repair shop, vehicles, and of environmental impact. Students will gain knowledge of diesel engine design, engine oil types, correct application, diesel emission systems, and fuel delivery systems.
Lecture Hours: 36         Lab Hours: None          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 093B  Light/Medium Duty Diesel Systems   Units: 4

This course provides theory and hands-on experience in the fundamentals of light and medium duty diesel systems including: engine construction, lubrication, cooling, fuel delivery, and emission systems. In addition, this course covers maintenance and light repair.
Lecture Hours: 54         Lab Hours: 54          Repeatable: No
Grading: Letter
Prerequisite: None
Advisory: AUTO-010
Limitation on enrollment: None
Transfer Status: CSU                 Degree Applicable: AA/AS
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 301  Automotive Terminology   Units: 0

This course provides an introductory level explanation of the major automotive system components, and a brief description of component function. This course includes engine, transmission, suspension, steering, braking, heating and air conditioning, emissions, computer control, and exhaust systems. This course is designed to prepare learners for entry-level employment in the automotive field of parts.
Noncredit Hours: 16                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: ESLN 310D
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 304  Automotive Calculation   Units: 0

This course includes an overview of the automotive industry with an emphasis on shop safety and service information.
Noncredit Hours: 16                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: ESLN 310D
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 305  Automotive Safety & Service Information   Units: 0

This course includes an overview of the automotive industry with an emphasis on shop safety and service information.
Noncredit Hours: 16                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 306  Automotive Service: Oil Change   Units: 0

This course provides theory and hands-on experience in performing key automotive services required by entry-level technicians in an automotive repair facility atmosphere. It is geared for those entering the workforce as an automotive technician.
Noncredit Hours: 18                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 305
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 307  Automotive Repair Facility Orientation   Units: 0

This course provides theory and hands-on experience of orientation procedures and required entry-level skills representative of someone newly hired by an automotive service facility. A uniform is required for this course.
Noncredit Hours: 9                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 306
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 310  Automotive Components   Units: 0

This course provides lecture activities pertaining to eight major system components of the automobile including components of the engine, transmission, suspension, steering, braking, heating and air conditioning, emissions, computer control systems, and exhaust systems.
Noncredit Hours: 16                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301 & ESLN 310A
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 325  Automotive Express Service   Units: 0

This course provides lecture/laboratory activities performing common services on today's automobile generally performed at a "quick service station". These activities include proper fluid inspection, fluid services on serviceable systems, tire inspection and rotations, minor brake inspections, courtesy services, and customer service.
Noncredit Hours: 24                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 304 & ESLN 310A
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 340  CNG Fundamentals & Safety   Units: 0

This course provides lecture/discussion on compressed natural gas (CNG) vehicle safety and operation. The course is designed to introduce the service technician to safety, operation, and basic practices and procedures unique to gaseous fuel vehicles.
Noncredit Hours: 36                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 340A  CNG Component Function & Operation   Units: 0

This course provides classroom lecture/discussion and interactive training on compressed natural gas (CNG) vehicle components, their function, and operation. This equips technicians to better service and repair CNG vehicles.
Noncredit Hours: 18                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 340
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 340B  CNG Maintenance & Repair   Units: 0

This course provides classroom lecture/discussion and interactive training on compressed natural gas (CNG) maintenance and repair procedures. This class is targeting skills required to obtain an entry-level position working on CNG vehicles.
Noncredit Hours: 18                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 340
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 340C  CNG Diagnosis & Troubleshoot   Units: 0

This course provides classroom lecture/discussion and interactive training on CNG vehicle diagnosis and repair. The course is designed to introduce the service technician to safety, diagnostic and troubleshooting practices and procedures unique to gaseous fuel vehicles including: ignition, fuel delivery and emissions systems design, operation, diagnosis and service.
Noncredit Hours: 18                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 340
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 340D  CNG Diagnosis with Scan Tool   Units: 0

This course provides classroom lecture/discussion and interactive training on compressed natural gas (CNG) vehicle diagnosis utilizing current scan tool diagnostics. The course is designed to introduce the service technician to intermediate and advanced scan tool diagnosis.
Noncredit Hours: 18                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 340
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 341A  CNG Conversion & Installation A   Units: 0

This course will introduce learners to basic compressed natural gas (CNG) conversion and installation, focusing on applicable legislation, regulations and procedures for conversion of vehicle from gasoline to CNG. Topics include: review of gaseous fuel safety, CNG conversion/installation and advantages and disadvantages.
Noncredit Hours: 30                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 340
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 341B  Compressed Natural Gas (CNG) Conversion & Installation B   Units: 0

This course is designed to introduce learners to compressed natural gas (CNG) conversion/ installation basic service and repair. The following topics are covered in this course: review of gaseous fuel safety, review of CNG conversion/installation and service and repair of CNG conversions/installations.
Noncredit Hours: 30                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: AUTO 340
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 349  CNG Fuel System Inspection   Units: 0

This course helps to prepare technicians for the (CNG) Fuel System Inspection Certification Exam. It covers safety, fundamental operation and the information related to the installation and conversion regulations of CNG vehicles.
Noncredit Hours: 18                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 340
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 380A  Oscilloscope Basics   Units: 0

This course offers knowledge and skills related to an industry standard, automotive oscilloscopes. The learner will be shown navigation, interpretation, and application of state-of-the-art automotive oscilloscopes. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 385  ASE Exam Preparation   Units: 0

This 6-hour course is designed to help technicians, and those pursuing a career in the automotive service industry, understand critical Automotive Service Excellence (ASE) exam skills, review relevant information, and practice taking exams. Learners will be shown how to sign up for the ASE exams and navigate the ASE website. A study plan will be developed; homework is required.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390A  Shopkey Pro Level-1   Units: 0

This course is an introduction to an industry standard, automotive, service information system, ShopKey Pro. The learner will be shown basic navigation, interpretation, and application of electronic (Internet based) automotive service information. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390B  Shopkey Pro Level-2   Units: 0

This course offers advanced-level knowledge and skills related to an industry standard, automotive, service information system, ShopKey Pro. The learner will be shown advanced navigation, interpretation, and application of electronic (Internet based) automotive service information. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390E  Snap-On Digital Multimeter   Units: 0

This course offers basic knowledge and skills related to industry standard digital multimeter (DMM) operation and usage. The learner will be shown navigation, interpretation, and application of a Snap-on digital multimeter. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390G  Snap-on Battery Charging   Units: 0

This course offers intermediate-level knowledge and skills related to an industry standard, automotive battery charging systems. The learner will be shown navigation, interpretation, and application of industry standard battery chargers and proper charging practices. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390H  Snap-on Battery, Starting, Charging Systems Basics   Units: 0

This course offers knowledge and skills related to an industry-standard, automotive battery, starting, and charging system testing. The learner will be shown navigation, interpretation, and application of industry standard battery, starting and charging testers. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390J  Snap-on Battery, Starting, Charging Systems Diagnosis   Units: 0

This course offers knowledge and skills related to an industry-standard basic, automotive battery, starting, and charging system diagnosis. The learner will be shown interpretation and diagnosis of common battery, starting, and charging system malfunctions. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390M  Snap-On Precision Measurement   Units: 0

This course offers basic knowledge and skills related to industry standard precision measurement tool care and operation. The learner will be shown how to locate specifications and procedures applicable to precision measurements. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 30                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390R  Snap-On Tire Changer   Units: 0

This course offers basic knowledge and skills related to industry tire changer operation. The learner will be shown how to locate specifications and procedures applicable to changing tires. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390S  Snap-On Scan Tool Basics   Units: 0

This course offers basic knowledge and skills related to industry-standard scan tool operation and usage. The learner will be shown navigation, interpretation, and application of Snap-on scan tools. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 8                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390T  Snap-on Torque Measurement   Units: 0

This course offers basic knowledge and skills related to industry-standard torque wrench operation and usage. The learner will be shown how to locate specifications and procedures applicable to fastener torque. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 16                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 390U  Snap-on Tire Pressure Monitoring System (TPMS)   Units: 0

This course offers basic knowledge and skills related to industry-standard tire pressure monitoring system (TPMS) operation. The learner will be shown how to locate specifications and procedures applicable to the TPMS. This will enhance one of the required skills for employment and advancement within the automotive service industry.
Noncredit Hours: 6                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 410A  Noise, Vibration, and Harshness   Units: 0

This course offers knowledge and skills related to vehicle noise, vibration, and harshness (NVH) customer concerns. This will enhance the learner's essential skills for employment and advancement within the automotive service industry.
Noncredit Hours: 15                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 410M  Automotive Manufacturer Update   Units: 0

This course offers knowledge and skills relevant to service and repair of the latest vehicle systems and equipment updates provided by the manufacturers. This will enhance the learner's essential skills for employment and advancement within the automotive service industry.
Noncredit Hours: 30                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 411A  Automotive Electrical Review   Units: 0

This course offers an electrical review for those who have had some electrical exposure but need a refresher because they are trying to pass the Automotive Service Excellence (ASE) exam, better their position at their current job or gain employment in the automotive repair industry. This will enhance the learner's essential skills for employment and advancement within the automotive service industry.
Noncredit Hours: 8                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: AUTO 301
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 777A  Automotive Service Safety, Pollution Prevention, & Lift Institute   Units: 0

This course is designed to complete the safety, knowledge-based training required for all lab-oriented courses and automotive careers. This course covers in detail, safety in the shop environment, first aid, pollution prevention, and lift safety. This course is designed to instill a solid foundation of Automotive service safety. Pass/No Pass grading scale requiring complete completion of S/P2 web-based training modules including successfully passing the final exam.
Noncredit Hours: 8                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None

AUTO 778A  Automotive Shop Sustainability   Units: 0

This course is designed to complete the shop sustainability, knowledge-based training required for all lab-oriented courses and automotive careers. This course covers in detail, shop sustainability. Pass/No Pass grading scale requiring complete completion of SP2 web-based training modules including successfully passing the final exam.
Noncredit Hours: 4                                        Repeatable: Yes
Grading: Pass/No Pass
Prerequisite: None
Advisory: None
Limitation on enrollment: None
Transfer Status: None                 Degree Applicable: NONC
COD GE: None                 CSU GE: None                 IGETC: None